Chapter Check · Seeded & Balanced

Check the complete chapter.

Answer all 15 questions sampled evenly across every concept band, then submit once to review your score and a band-by-band breakdown.

ProgressAnswered 0 · Unanswered 15
Check code54
Start New Check
Question 1Application
1. A resistor's resistance is found to increase noticeably as more current is passed through it, due to self-heating. Strictly speaking, over this range of increasing current, is the resistor's V-I behavior perfectly ohmic?
Question 2Foundation
2. A wire has n=1×10²⁸ per m³, A=4×10⁻⁶ m², carrying a current of 3.2 A. Find the drift velocity. Use e=1.6×10⁻¹⁹ C.
Question 3Challenge
3. A component's resistance R(T) increases with temperature: at 20°C, R=8 Ω; at 70°C, R=13 Ω. If it carries exactly 2 A at 70°C, find the voltage across it at that temperature, and state whether the device behaves as strictly ohmic across this temperature range.
Question 4Challenge
4. A current of 4 A flows in one direction for 90 s, then reverses direction and flows at 3 A for the next 60 s. Taking the original direction as positive, find the NET charge transferred.
Question 5Foundation
5. A charge of 104 C flows through a wire in 8 seconds. Find the current.
Question 6Application
6. How many electrons flow past a cross-section per second in a wire carrying exactly 3.2 A? Use e=1.6×10⁻¹⁹ C.
Question 7Application
7. A single wire carries the same current through a wide section (A=18×10⁻⁶ m²) and a narrow section (A=2×10⁻⁶ m²). Find the ratio v_d(narrow)/v_d(wide).
Question 8Challenge
8. A wire carries a current that varies with time as I(t)=3t² (in amperes, t in seconds). Find the total charge that flows between t=0 and t=4 s.
Question 9Foundation
9. A wire of cross-sectional area 4×10⁻⁶ m² carries a current of 20 A. Find the current density.
Question 10Application
10. Two wires, X and Y, made of the same metal (same n) carry the same current, but wire X has twice the cross-sectional area of wire Y. Compare their drift velocities.
Question 11Foundation
11. A conductor draws 3 A at 33 V, and 7 A at 77 V. Verify Ohm's Law and find R.
Question 12Challenge
12. A copper wire (n=8.5×10²⁸ per m³) has cross-sectional area 1×10⁻⁶ m² and carries a current of 3.4 A. Find the drift velocity, then find the time taken for an electron to drift 1 m along the wire (assume the drift velocity stays constant). Use e=1.6×10⁻¹⁹ C.
Question 13Challenge
13. A wire tapers uniformly so that its cross-sectional area varies with position x as A(x)=A₀(1+x) (x in metres, A₀=2×10⁻⁶ m²), carrying a steady current of 8 A. Find the current density at x=0 and at x=3 m.
Question 14Application
14. Inside a battery's external circuit, electrons flow from the negative terminal, through the wire, to the positive terminal. In which direction is conventional current considered to flow through this EXTERNAL circuit?
Question 15Foundation
15. A resistor of 13 Ω carries a current of 3 A. Find the voltage across it.